Nowadays, more and more people play with bumper cars, go to the playground to play bumper cars, and find memories of childhood. It can be seen how popular the amusement equipment bumper cars are. So how do you choose a venue for a bumper car? Today, Zhang Hao of Beston Amusement In South Africa will tell you about the criteria for choosing a venue for bumper cars:
1. Must choose a smooth and smooth use site, flat concrete floor, tile floor, marble floor, etc.
2. The rough ground is likely to cause excessive wear of the wheels, and the replacement of the wheels, especially the frequency of replacement of the drive wheels, will increase accordingly.
3. Cracks or gaps on the ground may cause poor ride comfort, may also cause malfunction or damage to electronic components, and may cause damage to the frame and breakage of the motor output shaft and breakage of the wheels.
4. There should be no ditch or pool around the site. There must be comprehensive protective measures when there are ditches and pools to avoid damage to the vehicle and dangerous accidents.
5. The level of the site is appropriate, and the slope should not exceed 10 degrees. If the slope is too large, the speed of the bumper car will be slow and slow, and the speed will be too fast to control when going downhill.
6. There should be no sharp metal parts or corners on or around the ground to prevent damage to the car body and damage to the bumper strip.
7. The area of the operation site is not as large as possible. The maximum use area of each bumper car -https://amusementrides.co.za/bumper-cars-for-sale-in-south-africa/ is no more than 10 square meters, and the minimum is not less than 5 square meters. It is best to have a dedicated inflatable fence or guardrail to ensure the pedestrians break into the collision with the vehicle. Injury, thus avoiding economic losses.
1. Must choose a smooth and smooth use site, flat concrete floor, tile floor, marble floor, etc.
2. The rough ground is likely to cause excessive wear of the wheels, and the replacement of the wheels, especially the frequency of replacement of the drive wheels, will increase accordingly.
3. Cracks or gaps on the ground may cause poor ride comfort, may also cause malfunction or damage to electronic components, and may cause damage to the frame and breakage of the motor output shaft and breakage of the wheels.
4. There should be no ditch or pool around the site. There must be comprehensive protective measures when there are ditches and pools to avoid damage to the vehicle and dangerous accidents.
5. The level of the site is appropriate, and the slope should not exceed 10 degrees. If the slope is too large, the speed of the bumper car will be slow and slow, and the speed will be too fast to control when going downhill.
6. There should be no sharp metal parts or corners on or around the ground to prevent damage to the car body and damage to the bumper strip.
7. The area of the operation site is not as large as possible. The maximum use area of each bumper car -https://amusementrides.co.za/bumper-cars-for-sale-in-south-africa/ is no more than 10 square meters, and the minimum is not less than 5 square meters. It is best to have a dedicated inflatable fence or guardrail to ensure the pedestrians break into the collision with the vehicle. Injury, thus avoiding economic losses.
Comments
Post a Comment